Complete Dispersal Auction for Standard Rentals26DL

30 inch dig bucket, 48 inch clean up bucket, thumb, hydraulic Q/A, 78 inch stick, cab, A/C, heat, radio, 59 HP Perkins diesel engine, 77 inch back fill blade, aux hydraulic outlets, 16 inch rubber tracks, quilted windshield transport tarp, like new condition. Includes a transferable 5-year / 5,000- hrs extended warranty from the date of manufacture. Warranty transfer paperwork will be provided and signed at the office upon pickup of the machine.

24 inch dig bucket, 36 inch clean up bucket, hydraulic Q/A, thumb, aux hydraulics, 59 inch stick, enclosed cab, heat, A/C, quilted window transport cover. Note: Includes a transferable 5-year / 5,000- hrs extended warranty from the date of manufacture. Warranty transfer paperwork will be provided and signed at the office upon pickup of the machine.

24 inch dig bucket, 36 inch clean up bucket, hydraulic Q/A, thumb, aux hydraulics, thumb, back fill blade, 59 inch stick, enclosed cab, heat, A/C, Yanmar diesel engine block heater, oil pan heater, quilted window transport cover, 12 inch tracks, excellent condition. Includes a transferable 5-year / 5,000-hour extended warranty from the date of manufacture. Warranty transfer paperwork will be provided and signed at the office upon pickup of the machine.

78 inch smooth bucket, Hydraulic Q/A, 2 speed, enclosed cab, AC, aux hydraulics, 16 inch tracks, Note: recent work, new turbo, new tracks and sprockets & new regen can, a real nice low hrs unit

Ford 6.7 L V8 diesel engine, automatic transmission, A/C, P/W, P/L, cruise control, 5th wheel ball hitch, tool boxes, Amco V907N3S knuckle boom picker, wireless remote, 5840 lb max capacity, deck 71" long X 101" wide, , spring suspension, 225/70R19.5 duals, certification on picker expires Mar 3, 2027, engine light just came on code P2201 Nox sensor sell's as is

16 inch Dig bucket, 30 inch clean up bucket 2 speed travel, aux hydraulics, adjustable track width, Yanmar diesel engine, 9 inch tracks, good condition. Includes a transferable 5-year / 5,000-hour extended warranty from the date of manufacture. Warranty transfer paperwork will be provided and signed at the office upon pickup of the machine.

Yanmar diesel engine, 36 inch smooth bucket, aux hydraulics 13 GPM, 1000 lift capacity, 9 inch tracks, ISO control pattern joystick controls, good running unit

Yanmar diesel engine, 36 inch smooth bucket, aux hydraulics 13 GPM, 1000 lift capacity, 9 inch tracks, ISO control pattern joystick controls, good running unit

Yanmar diesel engine, 36 inch smooth bucket, aux hydraulics 13 GPM, 1000 lift capacity, 9 inch tracks, ISO control pattern joystick controls, good running unit

Kubota diesel engine, aux hydraulics, 36 smooth bucket, 7 inch tracks, in good operating condition

Yanmar diesel engine, 36 inch smooth bucket, aux hydraulics 13 gpm, 1000 lift capacity, 9 inch tracks, ISO control pattern joystick controls, good running unit

Isuzu 4 cylinder diesel engine, LED Lighting, 4 lamps, pintle hitch, torsion suspension, electric vertical mast, manual air shut off, newly certified fire extinguisher, just serviced and in excellent condition, , 205/75D15 tires

72 inch HLA tooth bucket, hydraulic Q/A, ISO or H pattern control, foot throttle, 2 speed, aux hydraulics, Enclosed cab, AC, LED side lighting, 10-16.5 tires, original serial number plate was lost factory replacement from bobcat installed, still running good

12 inch dig bucket, 24 inch clean up bucket, Yanmar diesel engine, retractable undercarriage, 35 inch stick, 34 inch backfill blade, aux hydraulics, 7 inch rubber tracks. Includes a transferable 5-year / 5,000- hrs extended warranty from the date of manufacture. Warranty transfer paperwork will be provided and signed at the office upon pickup of the machine.

16 inch dig bucket, 34 inch clean up bucket, thumb, 51 inch backfill blade, 39 inch stick, retractable under carriage, manual Q/A, Yanmar diesel engine, 9 inch tracks

Kohler twin cylinder fuel injected 25HP electric start gas engine, feed roll governor, updated drive engagement (removed electric clutch and installed factory manual drive engagement), 175/80R13 tires, completely serviced and ready for work

60 inch smooth bucket manual Q/A, Perkins diesel engine, (1) aux hydraulic outlet, windshield screen, 10-16.5 tires, well maintained machine in good working order

Honda 13 HP gas engine, adjustable hammer height, 225/75R15 tires, Note: In 2024 complete upgrade on all pins and bushings to oversize with grease fittings (make unit much tighter than factory pins and bushings), upgraded post hugger, hammer cylinder resealed, wheel bearings replaced, engine serviced, unit is excellent condition ready to go to work

102 inch wide deck, 72 inch beaver tails, wood deck, flip over ramps, electric brakes, spring suspension, 2-5/16 inch ball hitch, tool / storage box, rub rails, stake pockets, LED lights, spring assisted monster ramps, rear jack stands, dual jacks, excellent condition, 12000 lb axles, 235/80R16 tires

Kohler twin cylinder 25HP electric start gas engine, feed roll governor, updated drive engagement (removed electric clutch and installed factory manual drive engagement), 175/80R13 tires, completely serviced and ready for work

Kawasaki FX730V twin cylinder 23.5 HP gas engine, in very good operating condition, Note: trailers Lot 253 or 254 custom built to fit stump grinder for transport.

Kawasaki FX730V twin cylinder 23.5 HP gas engine, in very good operating condition, Note: trailers Lot 253 or 254 custom built to fit stump grinder for transport.

Honda 13 HP gas engine, adjustable hammer height, 225/75R15 tires, Note: in 2025 complete upgrade on all pins and bushings to oversize with grease fittings (make unit much tighter than factory pins and bushings), upgraded post hugger, hammer cylinder resealed, wheel bearings replaced, engine serviced, unit is excellent condition ready to go to work

Kohler twin cylinder fuel injected 25HP electric start gas engine, feed roll governor, updated drive engagement (removed electric clutch and installed factory manual drive engagement), 175/80R13 tires, completely serviced and ready for work

10 inch dig bucket, 13 inch clean up bucket, 34 inch back fill blade, 2 speed travel, 32 inch stick, adjustable track width, Kubota diesel engine, 7 inch tracks, nice condition

Honda 13 HP gas engine, adjustable hammer height, 225/75R15 tires, Note: in 2024 complete upgrade on all pins and bushings to oversize with grease fittings (make unit much tighter than factory pins and bushings), upgraded post hugger, hammer cylinder resealed, wheel bearings replaced, engine serviced, unit is excellent condition ready to go to work

Honda 13 HP gas engine, adjustable hammer height, 225/75R15 tires, Note: in 2026 complete upgrade on all pins and bushings to oversize with grease fittings (make unit much tighter than factory pins and bushings), upgraded post hugger, hammer cylinder resealed, wheel bearings replaced, engine serviced, unit is excellent condition ready to go to work

Kubota diesel engine, positive air shut off, 32 inch loader bucket, 7 inch tracks, in good working order

Kubota loader, 47 inch bucket, grill guard, Kubota D902 .9 L 3 cylinder 23 HP, diesel engine, hydro 2 range transmission, open station platform, joystick, front weights, 540 PTO, 3 point hitch, Kubota rear backhoe with 12" dig bucket, stabilizers, 18X8.50-10 front tires, 26X12.00-12 rear tires, spare front tire, New engine installed at 1587hrs

36 inch dig depth, 4 inch wide trench, Toro 24.5 HP gas electric start engine, 6 inch wide tracks, in very good condition. Trailer Lot 269 or 267 custom built to fit trencher for transport.

500 capacity, 24volt, electric drive, electric steering, like new condition, certification expires Mar 3, 2027

48 inch dig depth, 4 inch wide trench, Kohler twin cylinder fuel injected electric start engine, rear weights, 6 inch wide tracks, in very good condition, Note trailer for this unit that will grouped lotted in this sale. Trailer Lot 268 custom built to fit trencher for transport.

9 ft 6 inch high, whirly bird and side vent, in very good condition, Note: buyer responsible for load out

36 inch dig depth, 6 inch wide trench, Kohler twin cylinder fuel injected electric start engine, rear weights, in very good condition, Note trailer for this unit that will grouped lotted in this sale. Trailer Lot 269 or 267 custom built to fit trencher for transport.

Honda GX630 20 HP gas engine, runs very good, drives and vibrates

2-5/16 inch Ball hitch, 7 ft box width, roll tarp, ramps, hydraulic power pack, corded lift remote, electric brakes, spring suspension, 7,000 lb axles, converted to greaseable spring shackles with brass bushings and grease fittings, like new condition, 235/80R16 tires

Hatz diesel engine, forward /reverse, excellent condition

Hatz diesel engine, electric start, forward/reverse, compaction control display

2-5/16 inch Ball hitch, 7 ft box width, roll tarp, ramps, hydraulic power pack, corded lift remote, electric brakes, spring suspension, 7,000 lb axles, 235/80R16 tires

2-5/16 inch Ball hitch, 7 ft box width, 27 inch side wall height, roll tarp, ramps, corded lift remote, electric brakes, spring suspension, 7,000 lb axles, suspension is greaseable, nice condition, 235/80R16 tires

(2) 8 inch dig bucket, (1) 12 inch dig bucket, (1) 15 inch clean up bucket 35.5 inch back fill blade, 2 speed travel, aux hydraulics, adjustable track width, Yanmar diesel engine, 7 inch tracks, (1) extra good used track, good condition

pintle hitch, diesel fired boiler, 1000 ft of ground thaw heater hose, in good working order, spring suspension, 185/80R13 tires

Kohler diesel engine, remote control, dry cell battery, runs and operates fine

Kohler Twin cylinder diesel engine, forward/reverse, hydro drive, excellent condition

83 inch wide deck, 17 ft tilt deck, wood deck, electric brakes, torsion suspension, 2-5/16 inch ball hitch, rub rails, stake pockets, D ring tie downs, very good condition, spare, 7000 lb axles, 235/80R16 tires

pintle hitch, diesel fired boiler, 1000 ft of ground thaw heater hose, in good working order, spring suspension, 185/80R13 tires

82 inch wide deck, wood deck, stand up ramps, electric brakes, spring suspension, 2-5/16 inch ball hitch, rub rails, stake pockets, LED lights, spare, 7000 lb axles, 235/80R16 tires

29 inch wheel, excellent condition

82 inch wide deck, 24 inch beaver tails, wood deck, stand up ramps, electric brakes, spring suspension, 2-5/16 inch ball hitch, rub rails, stake pockets, spare, grease suspension, excellent condition, 7000 lb axles, 235/80R16 tires

Ball hitch, 7 ft box width, 24 inch side wall height, roll tarp, hydraulic power pack, corded lift remote, electric brakes, spring suspension, 7,000 lb axles, lift power up, down & gravity down, spare, ramps, greaseable suspension, aluminum outer wheels, 235/80R16 tires

with charging gauge & fittings, excellent condition

Kohler 23 HP electric start gas engine, 9000 watt continuous generator, cables reels with cable, in excellent condition

Hatz electric start diesel engine, forward/reverse

82 inch wide deck, 15.5 ft tilt deck, wood deck, electric brakes, spring suspension, 2-5/16 inch ball hitch, tool / storage box, rub rails, stake pockets, fender protection bar, good condition, 7000 lb axles, 235/80R16 tires

Ball hitch, 5 ft box width, 18 inch side wall height, roll tarp, ramps, hydraulic power pack, corded lift remote, electric brakes, spring suspension, 5,000 lb axles, spare, power up, down & gravity down, 225/75R15 tires

Open station with ROPS, propane, hydro transmission, (2) propane tanks, 187 inch max lift height, 3 mast stages, 48 inch pallet forks, side shift, 6.50-10 front tires, 5.00-8 rear tires

1.5 HP 3 phase, with (2) tool boxes full of accessories, new Morse taper tail stock, Morris taper drill bits, flat bottom drill bits, (3) micrometers, (1) digital caliper, extra 4 jaw chuck, face plates, Large selection of cutter and cutter holders, magnetic dial indicators, oil, round stock, this a real complete lathe for the serious machinist, in very nice condition, the motor may have to changed for those who don't have 3 phase power

Lombardini diesel engine, remote control, dry cell battery, runs and operates fine

Hatz diesel engine, electric start, forward/reverse, needs exciter bearings & has low compression

82 inch wide deck, wood deck, stand up ramps, electric brakes, spring suspension, 2-5/16 inch ball hitch, stake pockets, spare, greaseable suspension, very good condition, 7000 lb axles, 235/80R16 tires

Brigg & Stratton 344 cc gas engine, variable speed with reverse, 16X6.50-8 tires, just serviced in good running condition

72 inch wide deck, 14 ft tilt deck, wood deck, electric brakes, spring suspension, ball hitch, 7000 lb axles, 235/80R16 tires

72 inch wide deck, 14 ft tilt deck, wood deck, electric brakes, spring suspension, 2-5/16 inch ball hitch, tie down rings, 7000 lb axles, 235/80R16 tires

72 inch wide deck, 14 ft tilt deck, wood deck, electric brakes, spring suspension, 2-5/16 inch ball hitch, stake pockets, LED lights, spare, greaseable spring shackles, in very good condition, 7000 lb axles, 235/80R16 tires

74 inch wide deck, 12 ft tilt deck, wood deck, hydraulic brakes, spring suspension, ball hitch, spare, D ring tie downs, galvanized, excellent trailer in very good condition, 7000 lb axles, 235/80R16 tires

72 inch wide deck, 12 ft tilt deck, wood deck, hydraulic brakes, spring suspension, 2-5/16 inch ball hitch, spare, galvanized, D ring tie downs, 7000 lb axles, 235/80R16 tires

74 inch wide deck, 12 ft tilt deck, wood deck, hydraulic brakes, spring suspension, 2-5/16 inch ball hitch, spare, galvanized, D ring tie downs, excellent condition, 7000 lb axles, 235/80R16 tires

74 inch wide deck, 12 ft tilt deck, wood deck, hydraulic brakes, spring suspension, 2-5/16 inch ball hitch, spare, D ring tie downs, galvanized, excellent condition, 7000 lb axles, 235/80R16 tires

Honda 13 HP gas engine, variable speed with reverse, 16X6.50-8 tires, just serviced in good running condition

Honda gas engine, forward/reverse, Completely rebuilt, new engine, exciter overhaul including new plate, very good unit

very nice condition

pintle hitch, diesel fired boiler, 1000 ft of ground thaw heater hose, in good working order, spring suspension, 175/80R13 tires

with dust collection bag, 110 volt, 1.5hp motor, excellent condition

115 volt, single phase, in great condition

115 volt, single phase, in great condition

Kawasaki 2 cylinder liquid cooled 20 HP, engine, hydro transmission, power steering, front weights, 540 PTO, 3 point hitch, 16X7.75-8 front tires, 23X10.50-12 rear tires, John Deere 450 3 Pt hitch rotary tiller, 540 pto shaft, (2) filters

Honda GX270 gas engine, forward/reverse, good running condition

Kohler 277 cc electric start engine, hydro drive, front casters, in like new condition

120 volt, in great condition

120 volt, in great condition

recently rebuilt in nice condition

Kubota 3 cylinder diesel engine, 4 lamps, pintle hitch, torsion suspension, positive air shut off, hydraulic vertical mast, newly certified fire extinguisher, just serviced and ready to go, 5.30-12 tires

230 volt single phase, bottle can be exchanged for refill at Parts Stop in Spruce Grove, in very good condition

82 inch wide deck, wood deck, stand up ramps, electric brakes, spring suspension, 2-5/16 inch ball hitch, stake pockets, deck railing, 3500 lb axles, 205/75R15 tires

54 inch wide deck, wood deck, stand up ramps, torsion suspension, 2 inch ball hitch, spare, nice well built trailer, 175/80R13 tires

Honda GX200 gas engine, 24 inch wood capacity, vertical or horizontal splitting, serviced and in good working condition

49 inch wide deck, wood deck, stand up ramps, torsion suspension, 2 inch ball hitch, very good condition, 2000 lb axles, 175/801R13 tires

49 inch wide deck, stand up ramps, torsion suspension, 2 inch ball hitch, very good condition, 2000 lb axles, 175/80R13 tires

110 volt power, thermostat, good working unit

Honda 13 HP gas engine, upgraded grinding wheel, this unit has mechanical issues (needs clutch & engine work)

Honda GX270 gas engine, forward & reverse, good running condition

Honda GX270 gas engine, good running condition

Honda GX270 gas engine, forward/reverse, good running unit

Honda GX200 gas engine, 24 inch wood capacity, serviced and in good working condition

Honda GX390 13 HP gas engine, upgraded grinder wheel, in good running condition

110 volt power, very good unit with full tank of fuel

110 volt power, thermostat, very good unit with full tank of fuel

71 inch high, (6) 3/4 inch rails, 2-7/8 pipe frame, same pictures used for all panels because are being used for security. Note: pickup dates are Apr 23 & 24

76 inch wide deck, 12 ft tilt deck, wood deck, stand up ramps, electric brakes, torsion suspension, 2-5/16 inch ball hitch, spare, D tie down rings, good reliable tailer, 7000 lb axles, 235?80R16 tires

76 inch wide deck, 10 ft tilt deck, steel deck, electric brakes, spring suspension, 2-5/16 inch ball hitch, D ring tie downs, good trailer, 7000 lb axles, 235/80R16 tires

60 inch wide deck, 10 ft tilt deck, steel deck, electric brakes, spring suspension, D ring tie downs, 5000 lb axles, 235/80R16 tires

steel deck, stand up ramps, electric brakes, spring suspension, 5000 lb axles, 235/80R16 tires

panel rolls out 12 ft, when used as a set you have a 24 ft gate opening, 71 inch high, (6) 3/4 inch sucker rod rails, 2-7/8 inch pipe frame. Note: pickup dates are Apr 23 & 24

panel rolls out 12 ft, when used as a set you have a 24 ft gate opening, 71 inch high, (6) 3/4 inch sucker rod rails, 2-7/8 inch pipe frame. Note: pickup dates are Apr 23 & 24

71 inch high, (6) 3/4 inch rails, 2-7/8 pipe frame, same pictures used for all panels because are being used for security

71 inch high, (6) 3/4 inch rails, 2-7/8 pipe frame, same pictures used for all panels because are being used for security. Note: pickup dates are Apr 23 & 24

71 inch high, (6) 3/4 inch rails, 2-7/8 pipe frame, same pictures used for all panels because are being used for security. Note: pickup dates are Apr 23 & 24

with dust collection bag, 110 volt, 1.5hp motor, good working order

(1) 12 inch auger, (1) 10 inch auger, (1) 8 inch auger, (1) 4 inch auger (2) auger extensions, Honda 13 HP gas engine in good operating condition

very good condition

in good working order

49 inch wide deck, wood deck, stand up ramps, torsion suspension, 2 inch ball hitch, very good condition, 2000 lb axles, 175/80R13 tires

300-amp (at 60% duty cycle) portable inverter welding power source capable of MIG, TIG, Stick, and Flux-Cored welding. It features Auto-Line technology 208–460V, 1 or 3-phase input, 5–400A output range, and a 14-pin connector for wire feeders and remotes. in good working condition

extra tips and accessories, 115 volt, in excellent condition

(1) 8 ft aluminum screed, (1) 6 ft aluminum screed, (3) batteries, (1) charger, very good condition

good condition

very good condition

Honda GX160 gas engine, serviced and in good running condition

Honda GX160 gas engine, serviced and in good running condition

on cart with (1) chisel point bit, (1) chisel bit, in good working order

on cart with (1) chisel point bit, (1) chisel bit, in good working order

with heavy duty case, 3/4 inch chuck, in excellent condition

with thermostat, regulator and hose, in good working condition

with thermostat, regulator and hose, in good working condition

with thermostat, regulator and hose, in good working condition

in very good condition

very good condition

with thermostat, regulator and hose, in good working condition

Honda GX390 gas engine, starts and operates good

total of (10) shelves with wire mesh decking, 10 ft high

total of (10) shelves with wire mesh decking, 10 ft high

110 volt power, thermostat, good unit with full tank of fuel

110 volt power, thermostat, good unit with full tank of fuel

110 volt power, thermostat, good unit with full tank of fuel

110 volt power, full tank of fuel

110 volt power

Honda GX160 engine, nice condition

Honda GX160 gas engine, forward & reverse, new cutter bar, in good running condition

(1) battery, charger, new 14 inch concrete blade, excellent condition

in excellent condition

Honda GX390 gas engine, new concrete blade, good condition

good condition

12volt pump with Handy Reel, hose & nozzle, 12 volt battery included, forklift pockets, diesel was last in it, very good condition

good working condition

good working condition

new tines just installed, with concrete weights

with (2) rolls of aluminum wire, fits 212, 251 & 252 mig welders, in excellent condition

(3) complete wire mesh shelves, 10 ft high

(3) complete wire mesh shelves, 10 ft high, (2) extra shelf beams

(2) complete wire mesh shelf, 8.5 inch high

Honda GX160 gas engine, good running condition

Honda GX160 gas engine, good running condition

1 inch crankshaft

Subaru gas engine, good operating unit

has some welded repair spots

110 volt power, thermostat, good working unit full of fuel

110 volt power

3 HP 230 volt single phase motor, with extra mounted 4 inch X 24 inch stroke cylinder

6 inch vise, plate steel top, 37 inch high, real nice heavy welding and fabrication table

110 volt, lubrication tank with pump, part pail of cutting oil, in good working order

with Power fist 110 volt electric winch, in good working order

wired with plugs & light, 4 drawer tool box, (2) bolt bins (1) standard (1) metric with lots of bolts, vice mounted, rubber standing matt

25 inch Wide vibratory roller, electric start, Hatz diesel engine, starts and runs vibrates & drives, engine is weak low on power

Honda GX390 gas engine, new concrete blade, good condition

650 lb capacity, 24 ft max lift height

very nice condition

Honda GX160 5.5 HP gas engine, serviced and ready to go

Honda GX160 5.5 HP gas engine, serviced and ready to go

Honda GX160 5.5 HP gas engine, serviced and ready to go

1 HP motor, 110 volt, with dust collection bag, good working order

1 HP motor, 110 volt, with dust collection bag, 110 volt, good working order

Honda GX120 gas engine, good running unit

Honda GX160 gas engine, good running unit

Honda GX120 gas engine, good running unit

Honda GX120 gas engine, good running unit

Honda GX120 gas engine, good running condition

52 inch wide deck, wood deck, stand up ramps, spring suspension, 2 inch ball hitch, tool / storage box, stake pockets, spare, good little trailer, 2000 lb axles, 205/75R15 tires

48 inch wide deck, steel deck, stand up ramps, torsion suspension, 2 inch ball hitch, made for Toro trencher, 2000 lb axles, 5.30-12 tires

Honda GX 160 gas engine

good condition

good working unit

(1) 6 inch, (1) 9 inch, (1) 12 inch

(1) 6 inch, (1) 9 inch, (1) 12 inch

(1) 15 ft long, (2) 17 ft long, 71 inch high, (6) 3/4 inch rails, 2-7/8 inch frame. Note: pickup dates are Apr 23 & 24

115 volt 1.5 HP electric motor, 5 inch cut depth, 1 inch arbor

Subaru 4 cycle engine, 11inch pad, good running condition

Honda 4 cycle engine, 11 inch pad, good running condition

Subaru 4 cycle engine, 11 inch pad, good running condition

Subaru 4 cycle engine, 11 inch pad, good running condition

new 14 inch concrete blade, fuel injection, manual water control valve, good running condition

new 14 inch concrete blade, fuel injection, manual water control valve, good running condition

new 14 inch concrete blade, fuel injection, manual water control valve, good running condition

new 14 inch concrete blade, fuel injection, electronic water control valve, good running condition

with case, good working order

with case, good working order

with case, good working order

with case, good working order

Briggs & Stratton electric start 16 HP gas engine, starts and runs good with 28 inches of vacuum at inlet

48 inch wide X 93 inch long, lift height 32 inch, 20 inch ramp, transport handle with wheels, good working condition

6 ripper teeth, Q/A compatible

Kohler CH440 gas engine, hose and wand, in good working order

16 inch bar & chain, manual water valve, Unit still runs but compression is low

20 inch bar & chain, in excellent condition

24 inch wide, 78 inch high

with regulator and hose, in good working condition

with thermostat, regulator and hose, in good working condition

with thermostat, regulator and hose, in good working condition

(1) 4 inch auger, (1(6 inch auger, (1) 8 inch auger, (1) 8 inch ice auger, (1) extension

(1) 4 inch auger, (1) 6 inch auger, (1) 8 inch auger, (1) 8 inch ice auger, (1) extension, (1) 2 inch auger

with carrying bag, batteries, (1) charger, like new

with carrying bag, batteries, (1) charger, excellent condition

(18) 16 grit, (10) 24 grit, (10) 36 grit, (20) 60 grit(10) 100 grit, (1) slightly used 36 grit

2023 GPU 12 volt pump with hose & nozzle, mounted battery, always kept under roof, in very good condition

Tuthill 12 volt pump with hose & nozzle, mounted battery, always kept under roof, in very good condition

(2) AP300 batteries, charger, 10 inch bar and chain, (2) extra chains and (1) extra bar, great condition

current fire extinguisher, great from a barrier around a fuel tank

1) D722, (1) D905, (1) D902, & (2) used radiators

Excellent condition

Excellent condition

110 volt power, good working unit full of fuel

round, flat, square tubing, channel, a variety of cutoffs and miscellaneous steel, sells as a complete package

115 volt, in working order

60 inch D, 104 inch L, 72 inch H, qty of pipe & iron pieces

230 volt 3 phase, (2) wands, qty of hoses, shop built overhead arm, (2) floor washer bars on casters, chimney pipe, on wood pallet, nozzles and miscellaneous parts, Note this machine looks ugly but it works very well, pump just had a service kit put in.

80 gallon tank, 208-230 volt, 3 phase, in working order, was used in the shop on a daily basis

good working order

electric start, 120 volt outlets, excellent condition

good working order

Excellent condition

very good condition

57 inch wide x 64 inch deep X 48 inch high, pallet fork pockets, in excellent condition

Honda GX160 gas engine, chain drive case, good working order

(1) extra new blade, case

with stand, 110 volt, in good working order

with case, good working order

with case, good working order

with case, good working order

with case, good working order

with case, good working order

with case, good working order

1.5 HP motor, 110 volt, polisher pad & floor grinder, with extra grinder replacement pads

10 inch cutting wheel, 28 inch cutting length, 2.75 inch cutting depth, 2.3 HP motor

(1) 1/3 HP power snake with extra bits, (2) hand held snakes

mount on plate with 2 inch receiver, (plate fits Ford F550 truck in this sale), snatch block, receiver hitch with clevis, with corded remote, nice condition

Honda GXV160 gas engine, (1) 6 inch auger, (1) 8 inch auger, (1) 10 inch auger, (1) auger extension, stand not included, running

Honda GXV160 gas engine, (1) 6 inch auger, (1) 8 inch auger, (1) 10 inch auger, (1) auger extension, stand not included, running

fits Milwaukee fence stapler, 960 staples per box

42 inch deep, 99 inch high in front, 104 inch high in rear, metal cladding on front, sides and roof, was used for storing suction hose but woukd make a firewood shed, 20 ft skids, NOTE: hoses in pictures are not included

(35±) 100 grit, (32±) 60 grit, (40±) 80 grit, (49±) 36 grit, 9 polish pads, replacement sandpaper pad with outer rubber

(4) 16 grit, (15) 36 grit, (13) 60 grit, (6) 100 grit, (10) slightly used various grit belts

wired for power and lights, 7 drawer tool box with miscellaneous tools

digital display works and is accurate, in good working order

110 volt, dust collector bag

115 volt 1.5 HP electric motor, needs drive belt

fits Stihl TS500i/TS420 saws

fits Stihl TS500i/TS420 saws

fits Milwaukee fence stapler, 960 staples per box

good condition

good condition

good condition

good condition

good condition

(2) good condition, (1) with a couple burn holes

good condition

(2) 14 inch hard granite blades, (6) 14 inch masonry blades, (9) concrete & brick blades

(1) 16 inch segmented asphalt blade, (5) 18 inch asphalt segmented blades, (2) 10 inch segmented brick blades

(30) Epoxy removal & concrete grinder stones (6) were used slightly

with carrying bag

good condition

with tiller and paddle attachments

hood, packer drum scrapers, mounts, (2) remote cords, miscellaneous parts, all used

with (1) barrel & (1) barrel funnel

with (3) barrel & (1) barrel funnel

working unit

wood shelfs, bolted together

tubing flaring kit, valve spring compressor, brake drum caliper, cylinder hones with extra stones, Tack/Dwell meter, unused 2 inch pipe tap, OTC battery load tester, pressure gauge

wired with plugs and light, 29 inch deep, 37 inch high, with folding door tool storage above bench

244 cu ft oxygen bottle is at 900 PSI (just under half full), 150 cu ft acetylene bottle is at 150 PSI, just installed new torch and hoses, bottles can be exchanged at Parts Stop in Spruce Grove

18 inch deep, 60 inch high, 43 inch wide

(1) 3/4 inch drive socket set missing ratchet, (1) complete 1 inch drive socket set

(3) Boxes of Soudotec stud removal rod, (2) 11 lb box 1/8 7018 sealed box, (1) 11 lb 3/16 8018 sealed box, (1) stainless steel 3/32 sealed box, (3) Partial boxes of stud extracting rod, (1) part box of 3/32 8018(1) Partial box 1/8 chamfer rod, (1) 20 lb box of 1/8 down hand rod, (1) partial tube of 309 stainless steel rod, (2) partial hard surfacing boxes, (3) miscellaneous rods, qty of hard surfacing rods

196 cc gas engine, (1) 30 amp,120 plug & (4) 15 amp, 120 volt plugs, runs very good used very little

Honda GX240 engine, starts and runs very good with 28 inch of vacuum on inlet

Honda GX240 engine, starts and runs very good with 28 inch vacuum on inlet

Honda GX240 engine, starts and runs good with 26 inches vacuum on inlet

Honda GX240 engine, starts and runs good with 22 inches of vacuum on inlet

Honda GX200 engine, starts and runs good with 28 inches of vacuum on inlet

Honda GX160 engine, starts and runs good with 30 inches of vacuum at inlet

good condition

Honda 13 HP gas engine, hose and wand, in good working order

Honda GX200 gas engine, hose and wand, 2700 PSI. 3.3GPM, in good working order

Honda GX390 13 HP gas engine, upgraded grinder wheel, in good running condition

with tiller tines, in good running condition

with brushes, in good running condition

14 inch bar & chain, in good condition

(4) full boxes of 1-1/2 coil nails, (1) 3/4 full box of 1-1/2 inch coil nails

(2) hammers, (3) boxes of nails, (1) extension shoe

18 inch wide, 84 inch high, (28) shelf boards

chains are 64 drivers, bar part number 3306-000-1513, fits Stihl 461 Concrete chain saw

(4) 3/8 inch X (10±) ft chains

(4) 3/8 inch X (10±) ft chains

(4) 3/8 inch X (10±) ft chains

(4) 3/8 inch X (10±) ft chains

(1) 3/8 inch X (20±) ft chain, (1) 3/8 inch X (16±) ft chain, (1) 5/16 inch X (16±) ft chain, qty of short and pieces of chain

Milwaukee drill stone driver with timer, works very well for sharpening carbide stump teeth, extending useable life of teeth, comes with a qty of sharpened & unsharpened teeth

small amount of light cable

hardly used

3/4 inch chuck, vise, 12 speed, oiler can, 110 volt

(1) 20 ton bottle jack, (1) 12 ton bottle jack

Milwaukee heat gun, multi port fuel injector tester, battery and load tester, (2) hammers, (2) engravers, Qty of hand tools

on cart

110 volt, 6 ft whip, 1 inch head

with case, good working order

with case, good working order

with case, good working order

16 inch high X 9 ft long

(4) Pails of 50/50 Recotherm transfer fluid, Hose crimper, hose repair splice & hose end fittings with crimp rings, (2) temperature gauges, (2) pressure gauges, (1)_ strobe light, (1) burner control, nozzle, qty of hose, brass pump, reel brake, miscellaneous other repair parts

Honda engines

(2) extra unused blades, metal case, in good working order

Stihl spline, (2) 8 inch, (1) 6 inch, (1) 4 inch

Stihl spline, (2) 8 inch, (1) 6 inch

(1) 20 ft with inlet screen, (1) 16 ft with inlet screen

(1) 20 ft with inlet screen, (1) 18 ft extension hose

(1) 20 ft with inlet screen, (1) 20 ft extension hose

Large qty of new carbide teeth, bearings, tooth holders

Large qty of new carbide teeth, bearings, tooth holders

Orange & Blue section: 78 inch long X 24 inch deep X 79 inch high with 9 metal shelfs with shelf beams, Grey section: 72 inch long X 24 inch deep X 84 inch high with (7) wood shelfs with shelf beams

power rake set, (2) brushes, (1) tiller, (1) hedge clipper

(1) bed edger, (2) brushes, (1) tiller, (1) hedge clipper, (2) extensions

20 inch drum with water plug

very good condition

very good condition

very good condition

Plate fits Wacker ET65 excavator

Plate fits Wacker EZ36 excavator

Plate fits Wacker EZ17 excavator

in working order

(1) 4 ft 11 gauge steel, (1)2 ft X 8 ft 11 gauge steel plate, piece of aluminum checker plate, miscellaneous steel